Namų Statyba

Interior finishing in Vilnius

Interior finishing in Vilnius from partial finish to turnkey

We carry out interior finishing work for apartments, houses and commercial premises in Vilnius and Vilnius District: wall skim coating, painting, plasterboard work, ceilings, floors, tiling, electrical work, plumbing and complete home fit-out. A clear estimate within 24 hours, 20 years of experience and a 5-year workmanship warranty.

20 years of construction experience
287+ completed projects
24h initial estimate based on the property
5 years workmanship warranty
✓
From partial finish Apartments, houses, premises
€
Clear estimate Work, quantities, deadlines
⌂
Turnkey Walls, ceilings, floors, bathroom
↗
Vilnius and district Vilnius District, Trakai, Elektrėnai
When finishing is needed

Interior finishing – one of the most important stages after partial finish

Interior finishing is usually needed when buying a new apartment with a partial finish, building a detached house or fully renovating an older home. It is not just painting or flooring – it is the entire sequence of work, from utility connection points to the final move-in-ready result.

Namstatyba.lt helps plan the work to avoid chaos between different tradespeople. First, we assess the property, then prepare an estimate and plan the work sequence, and only then begin the finishing work.

Interior finishing work is relevant if:

  • you have bought an apartment with a partial finish;
  • you have built a house and need an interior fit-out;
  • you want to fully renovate an older apartment or house;
  • you need to fit out a bathroom, kitchen or other rooms;
  • you want one responsible contractor for the entire process;
  • you want a clear estimate rather than vague promises.
Real work

Neat finishing starts with the right work sequence

Most defects in interior finishing occur when work is done at the wrong time: floors are installed too early, electrical wiring is changed too late, waterproofing is omitted or substrate defects are not repaired before skim coating.

What do we check?

Wall and ceiling preparation, plasterboard structures, electrical and plumbing points, tiled areas, floor substrates, paint quality, corners, joints, doors, skirting boards and final touch-ups.

Interior finishing in Vilnius – wall preparation and finishing work
Interior finishing in Vilnius From partial finish to a fully fitted-out home
Finishing work in Vilnius – ceilings, walls and interior fit-out
Walls and ceilings Skim coating, painting, plasterboard structures
Complete interior finishing in Vilnius – apartment and house fit-out
Complete fit-out Floors, tiles, doors, final finishing work
What we do

Interior finishing work in Vilnius and Vilnius District

We can provide a complete interior finishing package or individual tasks as needed. We work on apartments, detached houses and commercial premises.

01

Wall skim coating and painting

Priming, skim coating, sanding, corner forming and painting. Walls are prepared to achieve a smooth, neat final appearance.

02

Plasterboard work

Plasterboard partitions, ceilings, niches, service enclosures, lighting zones and decorative structures. We coordinate these with electrical, plumbing and ventilation work.

03

Ceiling installation

Painted, plasterboard or structural ceilings with lighting solutions, curtain recesses and service details according to the room plan.

04

Floor installation

Substrate preparation, levelling and installation of laminate, vinyl, engineered wood flooring, tiles or other floor coverings. We also assess underfloor heating solutions.

05

Tiling

Tiling for bathrooms, WC, kitchens, hallways and utility rooms. Waterproofing, drains, niches, corners and neat finishing.

06

Electrical work and plumbing

Electrical points, lighting, sockets, switches, water supply, drainage, concealed systems, preparation and connection of sanitary fixtures.

Interior finishing costs 2026

How much does interior finishing cost in Vilnius?

The cost of interior finishing depends on the property's condition, area, surfaces, chosen materials, building services, number of bathrooms and desired finish level. A precise estimate is prepared based on the plan, photos and scope of work.

Work categoryWhat it includesMain factors affecting the price
Walls and ceilingsPriming, skim coating, sanding, painting, corners and touch-ups.Surface condition, number of coats, height and number of corners.
Plasterboard workPartitions, ceilings, niches, service enclosures and structures.Structural complexity, sound insulation and wet rooms.
TilesTiling bathrooms, WC, kitchens, floors and walls.Tile format, waterproofing, drains, niches and corners.
FloorsSubstrate preparation, levelling, floor covering installation and skirting boards.Substrate evenness, type of floor covering and underfloor heating.
Electrical workSockets, switches, lighting, wiring and additional points.Number of points, lighting zones, kitchen and smart solutions.
PlumbingWater supply, drainage, concealed assemblies and fixture connections.Number of bathrooms, connection points, drains and concealed systems.

For a more accurate price, send:

  • the area of the apartment, house or premises in m²;
  • a floor plan or drawings;
  • photos of the current condition;
  • whether electrical and plumbing work is needed;
  • whether a bathroom fit-out is needed;
  • whether you want labour only or labour and materials.
Partial or complete finish

What is the difference between a partial and a complete finish?

A partially finished home often looks almost ready, but in reality there is still a lot to do before moving in: electrical and plumbing points, wall preparation, ceilings, floors, tiles, doors, painting and finishing details.

Complete interior finishing means the premises are ready for actual use: walls are painted, flooring is laid, the bathroom is fitted out, the electrics work, doors are installed and minor finishing details are completed.

Complete interior finishing may include:

  • wall skim coating and painting;
  • ceiling installation or painting;
  • plasterboard partitions and structures;
  • tiling and waterproofing;
  • floor covering installation;
  • electrical and plumbing work;
  • bathroom fit-out;
  • doors, skirting boards, window sills and finishing details.
Work process

How does interior finishing work proceed?

Sequence is very important in interior finishing. First, building services must be planned, followed by surface preparation, then final finishes, with finishing details added only at the end.

1

Assessment

We review the plan, photos and work description, or visit the property.

2

Estimate

We calculate the work, quantities, material requirements and any possible additional stages.

3

Planning

We agree on the work sequence: electrical work, plumbing, plasterboard, walls, floors and tiles.

4

Work

We carry out the agreed finishing work and keep you informed of progress.

5

Completion

We check quality, complete minor touch-ups and hand over the property.

Why Namstatyba.lt

One contractor instead of chaos between different tradespeople

Interior finishing often stalls not because of a single task, but because of poor communication. The electrician blames the finisher, the finisher blames the plumber, and the customer is caught in the middle. That is why it is more convenient to have one responsible team that sees the whole process.

Namstatyba.lt works not only on finishing, but also on house construction, foundations, masonry, facades and other construction stages. This gives us a better understanding of how finishing solutions relate to the entire build.

Our advantages

  • 20 years of construction and finishing experience;
  • 287+ completed projects;
  • 5-year workmanship warranty;
  • a clear estimate within 24 hours;
  • Vilnius, Vilnius District, Trakai, Elektrėnai;
  • the option to carry out work from partial finish to turnkey;
  • progress photos and clear communication.
SEO content for Google rankings

Interior finishing for apartments, houses and commercial premises

Apartment interior finishing in Vilnius usually starts from a partial finish. These properties require planning of electrical points, plumbing, bathroom solutions, wall and ceiling finishes, floor coverings, doors, skirting boards and final finishing details. The clearer the initial plan, the less additional work arises later.

Interior finishing in detached houses is often more complex than in apartments. There may be more bathrooms, utility rooms, a boiler room, stairs, higher ceilings, more building services and larger areas. It is therefore important not only to achieve an attractive finish, but also to coordinate it with heating, ventilation, electrical and plumbing solutions.

For commercial interior finishing, functionality, durability and deadlines matter most. For offices, consulting rooms, service premises or other spaces, we select solutions based on intensity of use, customer traffic and the desired image.

Before starting interior finishing work, it is worth deciding clearly where sockets, light fixtures, plumbing fixtures, the kitchen, laundry area, wardrobes, TV area, internet connections and other everyday features will be. The more decisions made before work starts, the less dismantling and additional expense there will be later.

The most common interior finishing mistakes are starting without a plan, failing to assess wall condition, installing too few electrical points, omitting waterproofing in wet areas, laying floors too early or hiring different tradespeople without shared responsibility. A well-organised work plan helps avoid these mistakes.

Related services

Interior finishing is often linked to other construction stages

If you are planning a complete house fit-out, it is worth assessing other work at the same time: construction prices 2026, house construction in Vilnius, foundation installation in Vilnius, facade finishing work in Vilnius and masonry work in Vilnius.

FAQ

Frequently asked questions about interior finishing

Short answers to the questions customers most often ask before starting interior finishing work on an apartment or house.

The price depends on the property's area, surface condition, scope of work, materials and desired finish level. The most accurate estimate is prepared based on the plan, photos and list of work.

Complete interior finishing may include wall skim coating and painting, ceilings, floors, tiles, electrical work, plumbing, bathroom fit-out, doors, skirting boards, window sills and final finishing work.

Yes. You can order only wall skim coating, painting, tiling, floor installation, plasterboard work, bathroom fit-out or another specific stage.

Yes. We work on new-build apartments, houses and premises with a partial finish. We can fit out a home to a move-in-ready standard.

Yes. We carry out interior finishing work in Vilnius, Vilnius District, Trakai, Elektrėnai and surrounding areas.

Yes, a preliminary estimate can be prepared based on the area, photos and a brief work description. A plan and a clear scope of work are needed for a more accurate estimate.

The timeframe depends on the property's size and the scope of work. Smaller jobs may take a few days, while complete finishing of an apartment or house may take several weeks or longer.

Need interior finishing in Vilnius?

Send a plan, photos or a brief work description. We will assess the property and prepare a clear proposal. The more information you provide at the start, the more accurate the estimate will be.

Quick enquiry

If you do not want a second form at the bottom of the page, this block can be deleted.

EN ▾